I know some will hate it but here is my 452hp bagged Evo 8

2022.01.21 01:22 iamfrankcarter I know some will hate it but here is my 452hp bagged Evo 8

I know some will hate it but here is my 452hp bagged Evo 8 submitted by iamfrankcarter to MitsubishiEvolution [link] [comments]


2022.01.21 01:22 Consistent-Dot3326 looking for star shaped glasses!!!!

submitted by Consistent-Dot3326 to glassesadvice [link] [comments]


2022.01.21 01:22 khc00000 Anyone know what kind of stone this is?

Anyone know what kind of stone this is? submitted by khc00000 to Minerals [link] [comments]


2022.01.21 01:22 MissionAmbitious2879 Mischief Managed!! 🧶

Mischief Managed!! 🧶 submitted by MissionAmbitious2879 to YarnStorage [link] [comments]


2022.01.21 01:22 Vanillitta Oque acham disso? Ela se intitula racista, e transfobica, e uma comunidade que promove racismo, gordofobia, exposição de menores e anorexia, usam hashtags como #edtwt #nftwt e etc.. A maioria são menores e me preocupa que estejam viralizando esses conteúdos, e incentivando o racismo.

Oque acham disso? Ela se intitula racista, e transfobica, e uma comunidade que promove racismo, gordofobia, exposição de menores e anorexia, usam hashtags como #edtwt #nftwt e etc.. A maioria são menores e me preocupa que estejam viralizando esses conteúdos, e incentivando o racismo. submitted by Vanillitta to Racismo [link] [comments]


2022.01.21 01:22 scrappledon Can I be done loosing my mind, please?

I feel like a walking tornado. I drop everything, put things where they have no place being and just generally feel like the space that used to contain my brain now only consists strictly of jello.
I was having a washing machine malfunction so hollered for my husband for assistance. While waiting I grabbed one of the chocolate covered strawberries I made earlier from the fridge. Watching him fiddle with the towels from the washer I took my first bite and watched as all of the chocolate from my strawberry fell to the floor. I began laughing so hard I started to pee, then standing there with everything clenched unable to move because I didn’t want pee to start running down my legs I started farting which made me feel like I was going to sh*t myself. Laughing so hard made tears start rolling down my face, which led to real crying. Luckily we were right next to the bathroom so I threw down my strawberry and did a spin move to the throne then sat there laughing and crying. My husband is a good sport but likely thinks I’m loosing my mind, which I am….send help, and cookies. Sincerely, 34+4
submitted by scrappledon to pregnant [link] [comments]


2022.01.21 01:22 JohnTGamer penalities for leaving the game are too harsh

My game crashed once and when I came back my operator was in DEA, then I was gonna rescue him but after choosing a character, I got infinite loading. Then I had to alt f4 and another operator goes DEA and I get a 5 min penality to join matches. I think that you shouldn't literally lose your operator the first time you leave, or that instead the game should have a way to distinguish a crash/disconnection and leaving through the menu or alt f4
submitted by JohnTGamer to R6Extraction [link] [comments]


2022.01.21 01:22 Noted_Person Mech Discussion: The Orion

Disclosure: To be honest I'm a little worried about how this'll go, but I think it'll do great. Anyway, this is just a fun idea I had in my head, nothing too wrong with that. I think of it as a fun way to spark some communication in this subreddit, with the closest thing related to this being the "what build could I use with so and so", I don't mind the post, it's just not my thing. I also don't know if this is allowed, I checked the rules and it says nothing about it but its just me being paranoid hehe.
Anyway, welcome to the 1st Mech Discussion, or MD for short! This is an open discussion where you can express your opinions and maybe tell some stories about the topic mech of the day, but don't go criticize other peoples opinions about the mech okay? This should be a civil conversation with us being civilized people where we are able to point out flaws and weaknesses of said mech.
Speaking of mech, today we'll be starting off with the "Poor Man's Atlas", The Orion! A strong and sturdy 75 tonne / 37.5 ton mech that can certainly withstand itself in a fight with the right piloting. A wide variety of weapons to play with from hard hitting AC/10's, to M lasers that can certainly help when you're in a pickle (Oh god I just said that)! A speed of 64.8km/h / 40.2mph makes it useful for most missions that require a long distance to travel, and IMO one of the better mechs that goes well with Industrial/Construction looking paint.
IMO the Orion is in my top 5 for mechs as it's a damn useful mech with a loadout for any mission. It's like that one car that your grandparents owned when you were younger that didn't look as good as the more expensive cars but sure as hell lasted longer. I'd love to hear what you're guy's opinions about this workhorse is! 😁
Also quick info I won't be able to reply to most comments as of 10:20pm in the CST time because of me working on homework before finals week, wish me luck guy's!
submitted by Noted_Person to Mechwarrior5 [link] [comments]


2022.01.21 01:22 mrmaverick59 DIY Kart sim.

DIY Kart sim. submitted by mrmaverick59 to simracing [link] [comments]


2022.01.21 01:22 sharmaniti437 An overview of Python for Data Science and Machine Learning

submitted by sharmaniti437 to ProgrammingLanguages [link] [comments]


2022.01.21 01:22 Matlabguru Scala vs Java

Scala vs Java submitted by Matlabguru to Student [link] [comments]


2022.01.21 01:22 ShortAlgo $MRNA Look at this! Profit Factor of 35 and trade profitability of 77.78%9 trades executed and buy signal in place. 15 minute chart.

submitted by ShortAlgo to UltraAlgo [link] [comments]


2022.01.21 01:22 psi_delta_unga Progression if you stay in TGMC

Progression if you stay in TGMC submitted by psi_delta_unga to SS13 [link] [comments]


2022.01.21 01:22 potatojuicelmao [Ottawa, On] [H] Paypal, EMT [W] LGA 1150 mATX motherboard

I am looking for a motherboard for my i5-4570, nothing too fancy, as long as it runs, thanks.
submitted by potatojuicelmao to CanadianHardwareSwap [link] [comments]


2022.01.21 01:22 ShortAlgo $MRNS Look at this! Profit Factor of 40 and trade profitability of 88.89%9 trades executed and buy signal in place. 15 minute chart.

$MRNS Look at this! Profit Factor of 40 and trade profitability of 88.89%9 trades executed and buy signal in place. 15 minute chart. submitted by ShortAlgo to UltraAlgo [link] [comments]


2022.01.21 01:22 Kuramiuwu SS when

SS when submitted by Kuramiuwu to osumania [link] [comments]


2022.01.21 01:22 TheTinyTim Is Björk typically on-time or late to her shows?

This is my first time getting to see her live after a few years of just missing shows here and there, and was just wondering for those veteran concertgoers: how late does she tend to be to her shows?
submitted by TheTinyTim to bjork [link] [comments]


2022.01.21 01:22 Psuchemay MEOW_IRL

MEOW_IRL submitted by Psuchemay to MEOW_IRL [link] [comments]


2022.01.21 01:22 SloppyTops SAA-02 Jon Bonso Practice Exams / Solutions Architect AWS

So I was just curious about everyone's thoughts about if I should reschedule my exam as I will be taking it this Thursday and just finished the 6 practice exams and the following scores are as such:

  1. 67.7%
  2. 69.2%
  3. 72.3%
  4. 72.3%
  5. 75.4%
  6. 84.6%
All of them were taken within the first attempt and thank you guys so much for your help and advice!
submitted by SloppyTops to AWSCertifications [link] [comments]


2022.01.21 01:22 Farm_chickzn Octprint error

I am using a pi 4b 2 gb ram with a ender 3 v2
I am complete noob on pi, and I just installed octprint tonight, and it was not able to connect to the printer. With the instructions https://youtu.be/LpSLQB9kFsg
I am able to flash the driver to the pi and using http://octpi.local to access octoprint with my laptop. After all configuration, I try to connect octoprint to my ender 3v2 , it showed offline after error.
1.I have tried about 5 micro USB cable , and I am getting an anker micro USB from amazon . 2.When I plugged in the micro USB cable to endr 3v2 , the blue light up when the printer's power is off. So at least there are some sign of the micro uab port is working 3. I tried to connect the micro USB directly to my laptop, nothing will show up, and I have tried to down driver online, it doesn't help.
If my pc is able to access to octoprint, that should mean wifi connection is working?? I am not sure what information should I be looking up right now, any pointer will be appreciate!!!
submitted by Farm_chickzn to ender3v2 [link] [comments]


2022.01.21 01:22 Straight_Finding_756 Vote Librandu

Vote Librandu submitted by Straight_Finding_756 to librandu [link] [comments]


2022.01.21 01:22 ManicCanary Slowly dipping my toes back into the sims comminty after an almost 2 year hiatus. My friend posted this inspo pic and couldn't resist.. ShenSlip 42 available to drop and play. No CC.. OID: Manicpot8to.. On another note I wish we could add railings to only one side of stairs..

Slowly dipping my toes back into the sims comminty after an almost 2 year hiatus. My friend posted this inspo pic and couldn't resist.. ShenSlip 42 available to drop and play. No CC.. OID: Manicpot8to.. On another note I wish we could add railings to only one side of stairs.. submitted by ManicCanary to Sims4 [link] [comments]


2022.01.21 01:22 Bau5_Sau5 14 Minutes in.... Paul Reed Smith answers " Will PRS ever make a left handed Silver Sky SE?"

14 Minutes in.... Paul Reed Smith answers submitted by Bau5_Sau5 to Leftyguitarists [link] [comments]


2022.01.21 01:22 RaymondAaron BTC ❤️ BITCOIN ❤️ CRYPTO ❤️ BTC PRICE PREDICTION ❤️

BTC ❤️ BITCOIN ❤️ CRYPTO ❤️ BTC PRICE PREDICTION ❤️ submitted by RaymondAaron to Bitcoincash [link] [comments]


2022.01.21 01:22 87ssj 2012 acura tsx starting issue

I have a 2012 acura tsx, sometimes when I go to start ot it won't start , then if I open the hood and shut it, then try to start the car it starts. But my radio resets so seems like something with the battery? Anyone know what could possibly be the issue?
submitted by 87ssj to Acura [link] [comments]


http://smol-cdt.ru